Home > Products > Twin Color
 
Twin Color - VP-901CM2

Basic Specification
Connector USB2.0-A male – USB Micro-B male
Over-molding Plug yes
Cable Length 1.2 meter (10c x4 AWG, OD: 3.5mm)
OD 3.5mm
LED (0603) Red x1, Blue x1
Current 1.0 / 1.5 / 2.1 / 2.4 A

Introduction
    User have an original manufacture charger, PLUS, a few different USB AC adapters or Power Bank, but which one does good job by fast charging your Smart-phone or Tablet? iMex Cable can help user understand charging status, and charging progress, all on a single cable.

Product features
    LED Indicators indicate:
  1. Charging status: Red LED Turn “ON”.
  2. Charging device condition is met or not.
  3. Battery capacity is degrading or not can be captured by viewing variation of LED indicators.
  4. Fully charge can be found when LED indicators turn “Blue”.
  5. Needless to check the device to know charging status by using iMex Current Detect and Data Sync Cable.

Operation Step
    • Step 1: Plug USB (Male) connector to Adaptor USB (Female) port.
    • Step 2: Plug Micro USB (Male) to Smartphone Micro USB (Female) port.
    • Step 3: Plug Adaptor to Power Cord, and turn AC power “ON”. (Without connect Smartphone, Blue LED turn “ON”).
    • Step 4: Start Charge, LED Indicator turn “Red”. Input current start from 800~2,400mA (depend on Smartphone / Tablet manufacture setting), and step down to 300mA.
    • Step 5: Battery capacity reaches 85~90% full, the input current steps down to 300mA (depend on Smartphone manufacture setting). “Red” LED starts blinking (Trickle Charge).
    • Step 6: When input current less than 250mA, its mean: Battery Fully Charge, the LED Turn “Blue”.